Beisler 1282-4 - Manual (Page 69)

- 13 -
Closing Seam Machine 1282-4 Working Instructions Beisler Automated Sewing Equipment
D.3
Programming
R
Puller
The photocell determines the deviation of the fabric contour from the
ideal routing and adjusts the puller speed accordingly, if required.
•
If the sewing pieces are shifted sideways away from the stop, the
puller speed is too high,
• if the sewing pieces warp at the stop, the puller speed is too low.
14 PULLER SPEED
Major parameter / basic setting for speed
15 PULLER FASTER
Speed increase if sewing piece warps at stop
16 PULLER SLOWER
Speed reduction if sewing piece is shifted away from stop
17 DISTANCE TO PULLER DOWN
Distance after sewing start before the puller is lowered
18 DISTANCE W/PULLER DOWN
Distance along which the puller transports the sewing piece
19 DISTANCE PULLER LIFTS
Length of the distance along which the puller moves up to slacken
the sewing piece
M Roller
The parameter changes the length of the distance along which the roller
transports the sewing piece on the worktable from the sewing head to
the stacker.
25 STITCH TILL ROLLER DOWN
Sewing distance after sewing start before the roller is lowered; only
required for heavy materials
26 STITCH WITH ROLLER DOWN
Length of the distance along which the roller transports