Beisler 1282-4 - Manual (Page 89)

- 33 -
Closing Seam Machine 1282-4 Working Instructions Beisler Automated Sewing Equipment
D.3
Programming
Diagnostics
The DIAGNOSTIC menu contains service functions for testing machine
assemblies and initiators that control them.
1. Select the programming menus:
• Press the

key.
2. Select the DIAGNOSTIC function:
• Press the

key.
3. Select the test functions:
NOTE - Diagnostics functions
These service functions should only be performed as in-
structed by the Service Department of Beisler GmbH or in
cooperation with experienced service personnel members.
CAUTION - Damage to the machine!
During these tests, individual machine assemblies or ma-
chine cycles are started. If components are partially or
completely removed, machine components may be dama-
ged. Perform tests only when the machine is at operating
temperature!
F1 SERVICE TESTS
These menus are only accessible after the service code has been
entered and must only be selected as instructed by authorized ser-
vice personnel members.
F4 MAIN HEAD TESTS
F5 CONTOUR MOTOR TESTS
These functions are used for testing the contour guide stepper mo-
tors.
F1 SEWING MOTOR CONTROL
The nominal speed of the stepper motor is compared to the actu-
al motor speed.
1. Enter the desired speed using the numeric keypad. The motor
starts, the actual speed is captured and displayed.
2. To end the test:
• Press the

key.