Beisler 1282-4 - Manual (Page 71)

- 15 -
Closing Seam Machine 1282-4 Working Instructions Beisler Automated Sewing Equipment
D.3 Programming
W
Contour guide in sewing direction
The settings determine the behavior of the cnontour guide in the sewing
direction.
36 SEW CONTOUR START POS
Contour guide start position in sewing direction (direction of X)
37 CONTOUR SEWING MOVING
Contour guide speed during sewing (direction of X)
38 CONTOUR SEWING STOP-POS
Contour guide stop position until end of seam (stop at pressure foot
in sewing direction)
42 CONTOUR CLAMP OPEN
Clamp roller at contour guide for improved contour control; closes
upon sewing start signal or closes automatically with sewing para-
meter 05
00
Clamp roller remains open
01-99 Length of section (in cm) during which the roller secures the
sewing piece before it opens again
43 SEAML. TAILOR QUALITY
The sewing section controls the speed with which the the contour
guide moves from the lateral start position to the lateral stop position
if tailor-quality mode (parameter 40) has been selected.
This changes length of the the tapered seam section of the tailor-
quality crotch seam. This function van be fine-adjusted using the
setting of parameter 37.
X Lateral contour guide
The settings determine the behavior of the contour guide in the lateral
direction, across the sewing direction.
39 CONTOUR SIDE START POS
Contour guide start position (in direction of Y)
40 CONTOUR SIDE MODUS
00 Contour guide control off
01 Side seam and crotch seam
02- 04 Various curve forms for waist curve
11 Crotch seam in tailor quality
For mode 01, a curve for the contour guide control is calculated from
the stop point, depending on the sewing speed.
41 CONTOUR SIDE STOP POS
Contour guide stop position at cloth stop (in direction of Y)