Beisler 1282-4 - Manual (Page 76)

- 20 -
Closing Seam Machine 1282-4 Working Instructions Beisler Automated Sewing Equipment
D.3
Programming
Enabling / disabling seams in a sewing program
In a sewing program, individual seams can be disabled and the se-
quence of the seams can be changed. A disabled seam is not perma-
nently erased; it can always be reenabled, if required. This function af-
fects only the currently selected sewing program. You should always
note the current setting as a modified sewing program does not indicate
which seams are disabled.
1. Select the SEWING SEQUENCE function:
• Press the

key.
2. Position the cursor on the number of the seam that is to be disabled:
• Press the  or  key.
3. Disable seam:
• Press the  key at the numeric keypad.
4. Confirm change:
• Press the  key.
On the display, the seam number disappears from the sewing sequence.
To reenable the seam:
1. Select the SEWING SEQUENCE function:
• Press the

key.
2. Determine the position of the seam in the sewing sequence. Position
the cursor on the seam number after which the deactivated seam is
to be sewn again:
• Press the  or  key.
3. Enable seam:
• Enter the seam number using the numeric keypad.
4. Confirm change:
• Press the  key.
The display shows the seam number in the seam sequence.