Beisler 1282-4 - Manual (Page 85)

- 29 -
Closing Seam Machine 1282-4 Working Instructions Beisler Automated Sewing Equipment
D.3
Programming
Storage functions
The program control contains several functions for storing sewing pro-
grams or seams to the memory card. Sewing programs or seams
stored on the card can also be copied to the storage medium of the
operating panel.
NOTE - Data backup
A faulty EPROM or microprocessor of the machine control
may result in the loss of data. Therefore, all sewing pro-
grams or the individual seams should be copied to the
memory card at regular intervals.
Do not use the supplied memory card that contains the
standard sewing programs for data backup!
Formatting the memory card
If additional memory cards (optional) are used for data backup, they
must be formatted before they can be used.
1. Insert the memory card into the slot on the operating panel.
2. Select the programming menus:
• Press the . key.
3. Select the MEMORY CARD function:
• Press the  key.
4. Select the MEMORY CARD FORMAT function:
• Press the  key.
The display shows the confirmation prompt *ARE YOU SURE?*.
5. Confirm selection:
• Press the

key.
6. The display shows *O.K. PLEASE WAIT* until the formatting pro-
cess has been completed.