Beisler 1282-4 - Manual (Page 51)

Closing Seam Machine 1282-4 Working Instructions
- 22 -
Beisler Automated Sewing Equipment
C.5
Maintenance
C.5.5 Machine set-up
Photocell for sewing start:
Fig. 18: The photocell 01 controls the sewing start.
The vertical position and the horizontal alignment are set
at the bracket
1 .
The reflection point of the light beam is adjusted at the bra-
cket
2 . Set the position of the light beam so that the
reflection point between the two retaining screws of the
sewing unit
3 is immediately at the needle 4 .
Limit switch for guide clamp:
1. A bracket secures the initiator
5 to the guide rail.
The initiator serves as a start switch and ensures that
the guide clamp is pulled back to its original position.
The knurled screw
7 serves as a stop for opening
the guide clamp. To change the position of the stop,
loosen the knurled screw
7 and reposition the bra-
cket 6 on the guide rail.
Fig. 18
Fig. 18