Beisler 1282-4 - Manual (Page 75)

- 19 -
Closing Seam Machine 1282-4 Working Instructions Beisler Automated Sewing Equipment
D.3 Programming
09 SEWING CHANGE NAHTWECHSEL AUTO/MAN
Set seam change
00 Automatically
01 Manually
10 STAPLER IMPULSE TIME
Duration during which the roller unit is lowered and secures the sew-
ing piece until the stacker picks it up
11 CONTOUR RECOGNITION
Response time for changing the puller speed
12 THREAD MONITOR REACTION
Setting of the thread monitor
00 Disable function
01 Reaction sensitivity high
99 Reaction sensitivity low
(setting depends on thread used)
13 EFKA POSITION DOWN
Needle position upon machine stop
14 STITCH LENGTH
Setting of the stitch length; based on this value, the machine control
calculates the number of stitches for the individual sections
15 TOP FEEDING MAX POS.
Maximal fullness, value must remain unchanged
16 DIFFERENTIAL MAX POS.
Maximal fullness, value must remain unchanged
17 EFKA POSITION TOP / TT
Needle position upon thread trimming in sewing piece
18 T. FEED. POS COND. STITCH
Stepper motor position at top feeding with activated stitch
condensation
19 LONG STITCHES AFT. COND.
After stitch condensation, a long stitch may be required for thread
trimming ; in the basic setting, this function is disabled (00)