Beisler 1282-4 - Manual (Page 47)

Closing Seam Machine 1282-4 Working Instructions
- 18 -
Beisler Automated Sewing Equipment
C.5
Maintenance
Fig. 14: Setting the contour guide position 1 :
The start and stop positions of the contour guide in the
direction of X and Y are set using the special parameters
36 and 39 (direct access via access level 2) of the pro-
gram control (see Section D, Programming Instructions).
The start and stop positions are aligned with the contour
of the trousers components and should be set so that the
cloth clamp is always lowered exactly onto the hem.
The program control calculates the traveling motions of
the contour guide as a curve.
NOTE - Cloth clamp position!
If the sewing of pockets is integrated in the side seam, the
start position of the contour guide should be set in a way
that ensures that the lower start point of the pocket is
positioned before the contour guide and that the cloth
clamp also checks the contour of the trousers until the start
point of the pocket has been sewn.
Fig. 14: Setting the pressure of the automatic cloth
clamp:
The clamping pressure of the cloth clamp at the contour
guide can be set steplessly using the rotary button
2 .
Fig. 14
Fig. 14