Beisler 1282-4 - Manual (Page 37)

Closing Seam Machine 1282-4 Working Instructions
- 8 -
Beisler Automated Sewing Equipment
C.4
Operation and shut-down
C.4.1 Working with the machine
Factory settings
The machine has been preprogrammed at the factory with
six sewing programs (M 01- M 06).
Programs for trousers production:
M 01
Side seam with braid pocket
M 02 Side seam with pocket in side seam
M 03 Side seam with wing pocket
M 04 Crotch seam
M 05 Crotch seam with tailor quality
M 06 Side seam with seam interruption before hem
(available only for systems with additional
thread cutter feature)
Programs for jacket production:
M 01
Main seam
M 02 Seam interruption by stitch counter
M 03 Seam interruption by photocell
M 04 Thread cutting at beginning of seam, sewing
start in sewing piece
The sewing programs are so powerful that they can be
used for production.
They are furthermore perfectly suited for training opera-
ting personnel and can be used as a template for pro-
gramming customer-specific sewing programs.
For details about the programming of sewing programs,
please see Section D of the working instructions.
C.4.2 Machine shut-down
If the machine is to be shut down, it must be disconnec-
ted from all energy supply sources.
Disconnecting the machine from the power supply
system:
1. Turn machine off using main switch. Move switch to
position "0".
2. Remove power plug from socket and protect it against
accidental reconnection.
Disconnecting the machine from the compressed air
supply system:
1. Shut off on-site compressed air system.
2. Remove compressed air hose plug from terminal unit.
NOTE - Dust-proof protection!
If the machine is to be shut down for an extended period
of time, it should be covered with a plastic tarpaulin.