Beisler 1282-4 - Manual (Page 59)

- 3 -
Closing Seam Machine 1282-4 Working Instructions Beisler Automated Sewing Equipment
D.1
Operating panel
D.1.1 Description of the operating panel
Fig. 1: The operating panel is the display and data input medium of the
machine control. It contains the microprocessor that controls the machi-
ne and the storage media (EPROM) for backups of the program control.
Display 1
The display shows information about the machine control and the
sewing program parameters. If a function for a sewing program is
enabled or disabled, the symbol for that function and the pertaining
parameter value are displayed or disappear.
Slot 2 for memory card
The memory card is the storage medium for
backups of any machine control data. Se-
wing programs can be copied to the memory
card and retrieved back into the machine
control, if required.
Program stop switch 3
This switch is used for cancelling the ma-
chine cycle.
Numeric keypad 4
Use the numeric keypad to enter any chan-
geable numeric values. The sewing pro-
grams M01-M09 are activated by entering
the corresponding numbers. To activate the
sewing programs M10-M20, press the M
key, then enter the corresponding numbers.
Use the P key to select submenus, to con-
firm data input or to exit the programming
mode.
Arrow keys 5
Each pressing of the UP or DOWN arrow key will move the cursor
(flashing beacon) one line up or down in the selected menu. Use
the LEFT or RIGHT arrow key to mark the desired parameter in the
selected menu or to scroll through the selected menu if the para-
meter list consists of several pages.
Function keys 6
Use the function keys to select the program control menus.
Symbol bar 7
The symbol bar indicates the menus that can be selected directly
from the start level by using the function keys.
All other menus for setting machine or program functions can be
selected from the various program levels. The display of the opera-
ting panel shows the pertaining menu symbols.