Beisler 1282-4 - Manual (Page 88)

- 32 -
Closing Seam Machine 1282-4 Working Instructions Beisler Automated Sewing Equipment
D.3
Programming
3.3 Service menus
The service menus offer functions for setting up und testing the machi-
ne. These functions are selectable in two menus:
•
Diagnostic (F3) with the pertaining test programs:
Sewing motor, Puller / roller motor
• Additional programs (F4)
NOTE - Backward scrolling in program levels
When the programming menus are selected, the menu
used last is always displayed. This level is indicated by
the number (1) placed in front of the functions. For selec-
ting certain functions, you may have to scroll backward in
the programming and service menus.
• To select service menus:
• Press the  key.
• To scroll back in service menus:
• To scroll back in service menus:
• Press the

or

key.
Service code
The functions in the service menus are protected by a dual-stage ac-
cess privilege:
•
First, enter the machine code (50190) for copying sewing parame-
ters, basic parameters, and sewing programs and for selecting some
of the diagnostics programs.
• Select the menu again and enter the security code for selecting ad-
ditional programs. This code must be requested from the Service
Department of Beisler GmbH. The allocation of the function keys to
the individual letters are marked by the colors blue, red, and green.
1. Select the programming menus:
• Press the

key.
2. Select the SERVICE CODE function:
• Press the

key.
3. Enter code on the numeric keypad:
4. Confirm selection:
• Press the  key.