Beisler 1282-4 - Manual (Page 86)

- 30 -
Closing Seam Machine 1282-4 Working Instructions Beisler Automated Sewing Equipment
D.3
Programming
Data backup to memory card
You can either store individual seams or all sewing programs to the me-
mory card.
1. Insert the memory card into the slot on the operating panel.
2. Select the programming menus:
• Press the  key.
3. Select the MEMORY CARD function:
• Press the

key.
4. To store the selected seam, select the CURRENT SEAM > CARD-
function:
• Press the  key.
or
5. To store all sewing programs, select the ALL VARIABLES – >
CARD function:
• Press the

key.
6. Confirm the selection:
• Press the

key.
7. The display shows *O.K. PLEASE WAIT* until the data transmission
has been completed.
Copying data to the storage medium of the operating panel
Data stored on a memory card can be copied to the operating panel ei-
ther partially as individual sewing programs or completely (all sewing
programs).
NOTE - Overwriting data
If all sewing programs on the card are copied to the opera-
ting panel, all data (even seams that have been modified
before) will be overwritten.
Therefore, any changes to seams should immediately be
stored individually to the memory card.