Comtech EF Data MIDAS Version 4.X Basic Configuration User Manual
Page 153
Advertising
MIDAS 4.2 Basic Configuration Rev. 1
Maintenance Menu
A–11
Figure A-5. Example of MIDAS C-Band System Setup
Note: Refer to Section 2, Initial Setup Procedures for descriptions of additional System
Setup parameters.
After System Setup parameters are set, click OK [the Controller will reboot
with new parameters].
1. Allow the Controller to reboot. [The Controller will be in an “Exception” state be
cause the Space Segment and Control Channel has not be defined.]
2. Connect to the Controller with the Local Client.
3. Observe dialog box indicating that the Space Segment and Control Channel are
not OK.
4. The System Setup window is displayed.
5. Verify settings and click OK.
6. Space Segment window is displayed.
Advertising