3 features, 1 block up converter (buc-5003), 2 block down converter (bdc-5003) – Comtech EF Data MBT-5003 User Manual
Page 21
![background image](/files/778947/content/doc021.png)
MBT-5003 L-Band Up/Down Converter System
Revision 1
Introduction
MN-MBT5003
1–5
1.3
Features
• Meets or exceeds IESS-308/309
• Low phase noise
• Designed to facilitate operation within MIL-STD-188-164A systems
• Flexible configuration
• Guarded front panel power switch
• Output power monitor (up converter)
1.3.1
Block Up Converter (BUC-5003)
The BUC-5003 Block Up Converter module translates an L-Band (1000 to 1500 MHz) input
carrier to the desired X-Band (7900 to 8400 MHz) output frequency with an output level capable
of driving either solid state or tube-based amplifiers.
1.3.2
Block Down Converter (BDC-5003)
The BDC-5003 Block Down Converter module translates any X-Band (7250 to 7750 MHz)
signal to a corresponding L-Band (1000 to 15000 MHz) frequency.