Comtech EF Data MBT-5003 - Manual (Page 35)

MBT-5003 L-Band Up/Down Converter System Revision 1
External Connectors MN-MBT5003
3–5
3.2.2.6 POWER IN (IEC Line Input AC Power) Connector
IMPORTANT
For continued operator safety, always replace the fuses with the correct type
and rating.
A standard, detachable, non-locking, 3-prong power cord (IEC plug) supplies the
Alternating Current (AC) power to the converter.
Observe the following:
AC Power Specifications
Input Power 290W maximum, 110W typical.
Input Voltage 100 to 240 volts AC, +6/-10% - autosensing
(total absolute max. range is 90 to 254 VAC)
Connector Type IEC-320
Fuse Protection T2A (2.0A) Slow-blow
Line and neutral fusing
20 mm type fuses
3.2.2.7 Ground Connector
A #10-32 stud is used for connecting a common chassis ground among equipment.
Note: The AC power connector provides the safety ground.