1 config | mbt – Comtech EF Data MBT-5003 User Manual
Page 70
Advertising
MBT-5003 L-Band Up/Down Converter System
Revision 1
Ethernet Management
MN-MBT5003
6–14
6.5.5.3
Config Pages
Select the MBT, Utility, or Redundancy hyperlink to continue.
6.5.5.3.1
Config | MBT
Note: Low Noise Amplifier (LNA) operation is not supported by the MBT-5003. The Converter
A LNA and LPT, Converter B LNA and LPT, and Calibrate LNA Current sections of this
page are therefore nonfunctional.
Figure 6-6. Config | MBT page
The ‘Config | MBT’ page (Figure 6-6) provides the means to configure the communications,
operations, and alarms/faults handling for the MBT-5003 base unit and individual converters.
Advertising