Comtech EF Data MBT-5003 - Manual (Page 73)

MBT-5003 L-Band Up/Down Converter System Revision 1
Ethernet Management MN-MBT5003
6–17
6.5.5.3.3 Config | Redundancy
Figure 6-8. Config | Redundancy page
The ‘Config | Redundancy’ page (Figure 6-8) is used to configure the MBT-5003’s Redundancy
Switch operation.
Redundancy Mode
Use the drop-down menu to Enable or Disable Redundancy Mode, then click [Change
Redundancy Mode] to update MBT-5003 operation to the current Redundancy Mode status.
Redundancy Switch Override
Click [Force Converter A Offline] to force the Converter A into standby mode.
IMPORTANT
For detailed information about 1:1 Redundant operations, see Appendix B.
MBT-5003 REDUNDANCY OPERATION.