Comtech EF Data MBT-5003 - Manual (Page 23)

MBT-5003 L-Band Up/Down Converter System Revision 1
Introduction MN-MBT5003
1–7
1.4.5 BUC-5003 Block Up Converter (featured on MBT-5003-XUR)
Output Frequency 7900-8400 MHz
Input Frequency 1000-1500 MHz
Frequency Sense No Inversion
Impedance 50 Ω
Input Return Loss 15 dB minimum
Output Return Loss 18 dB minimum
Input Connector Type ‘TNC’ Female
Output Connector Type ‘N’ Female
Gain
38 ±2 dB nominal @ minimum attenuation
Full Band ±1.0 dB
Per 36 MHz ±0.50 dB
Per 20 MHz ±0.35 dB
0° to +56° C .75 dB/15°C ( ±1 dB, 0°-56 °C)
Mute 80dB
User Attenuation Range 0-50 dB, in 0.25 dB steps
Output Power, P1dB 22 dBm minimum
Noise Figure 15 dB @ minimum attenuation
Intermodulation Distortion -30 dBc min w/2 output carriers @ 17 dBm each
AM/PM Conversion 0.1°/dB @ 0 dBm Output
Spurious (In-band)
Carrier Related -75 dBc (<-80 dBc, typical)
Non-Carrier Related -70 dBm
Related
Lo Leakage -75 dBm
60 Hz & Harmonics <-36 dBc (typically <-50 dBc)
Phase Non-linearity
Per 20 MHz BW 8 degrees p-p
Per 36 MHz BW 12 degrees p-p
Phase Noise
Meets or exceeds MIL-STD-188-164A
100 Hz -68 dBc/Hz
1 kHz -78 dBc/Hz
10 kHz -88 dBc/Hz
100 kHz -98 dBc/Hz
1 MHz -108 dBc/Hz