Daktronics Venus 1500 Version 4 - Manual (Page 78)

Venus 1500 Software Version 4 Operation Manual
68
Set Brightness
Brightness can be set to automatically adjust or it can be adjusted manually.
 Automatic is the recommended setting, but can only be used with displays that have an external light
sensor installed at the display site. The display's brightness level adjusts automatically based on
readings from this light sensor.
 Manual brightness control allows you to adjust the intensity of the display using the Min/Max slider
bar.
Test Patterns
Test patterns assist maintenance personnel troubleshoot the display.
Select the desired test from the drop-down menu. Cycle All runs all of the listed tests. Click Start Test.
When testing is complete, click Stop Test.
Temperature Offset
Temperature Offset adjusts the external temperature sensor at the display site to reflect the true outside
temperature. The offset increases or decreases the temperature by the specified amount before showing it
on the display.
Use the up and down arrows to specify the amount of offset. Click Set Temperature Offset to activate
the adjustment.