GAI-Tronics MRTI 2000 (No. PL1877A) Microprocessor Radio Telephone Interconnect Installation & Service Manual - Manual (Page 118)

Parameter Modification PL1877A Microprocessor Radio Telephone Interconnect
12/10 112
Para-
meter
No.
Description
Control Digits Refer to
Section on
Page:
496–499 Four-digit emergency access number
excepted from toll restrictions.
Valid range = 0–9 (4 digits) 97
500 Maximum phone number length allowed.
If this parameter is greater than 20, an
entry of 20 is assumed. Valid range = 1–20 97
501–512 Station ID (SID) See appropriate section. 95
514 Enhanced VOX delay. Valid range = 0–100
Default = 100 84
515–517 Override table entry corresponding to
multi-digit access prefix #1.
See appropriate section. 91
518–520 Override table entry corresponding to
multi-digit access prefix #2.
See appropriate section. 91
521–523 Override table entry corresponding to
multi-digit access prefix #3.
See appropriate section. 91
524–526 Override table entry corresponding to
multi-digit access prefix #4.
See appropriate section. 91
527–529 Override table entry corresponding to
security code.
See appropriate section. 91
530–535 Wildcard access/release code template - a
6-byte template that defines the structure
of wildcard access/release codes. The
code appearing in the template must be
right justified (the last digit of the template
must be in parameter 535). Filling the
template with $FF disables wildcard
features.
Refer to the Wildcard
Access/Release section in this
manual. 91
549 Signaling pretime - the delay between
activating the PTT and generating mobile
signaling. Valid range = 0–24
Default = 3 87
1001 Determines whether selective signaling
from a landline caller on line 1 is enabled
or disabled. 0 = Disabled
1 = Enable
Default = 0 117
1002 Determines whether selective signaling
from an attendant is enabled or disabled. 0 = Disabled
1 = Enable
Default = 0 119
1003 Determines whether mobile revertive
mobile-to-mobile signaling is enabled or
disabled. 0 = Disabled
1 = Enable
Default = 0 119
1004 Determines whether the PL strip output
during transmission of selective signaling
tones is activated or deactivated. 0 = Deactivate
1 = Activate 122