Paging, Telephone line, Paging enabled from telephone line – lines 1 & 2 – GAI-Tronics MRTI 2000 (No. PL1877A) Microprocessor Radio Telephone Interconnect Installation & Service Manual User Manual
Page 50: Telephone line group calls enabled, Number of digits accepted from telephone line, Pulse dial decoding – telephone line
PC Programming
PL1877A Microprocessor Radio Telephone Interconnect
12/10 44
Paging
Paging – Telephone Line
Paging Enabled from Telephone Line – Lines 1 & 2
Enables/disables access to the paging option from a landline originated call.
Telephone Line Group Calls Enabled
Enables the ability of landline users to cause generation of 2-Tone group calls.
Number of Digits Accepted from Telephone Line
Determines the number of digits accepted from landline user for paging. The range is from 0 to the
maximum allowed by the Paging Format.
Pulse Dial Decoding – Telephone Line
Determines whether rotary (pulse dial) phone can be used to input paging digits.
N
OTE
: The telephone network must support pulse dialing throughput. Many electronic central office
switches will disconnect a call if over-dialing is attempted in rotary, or pulse mode after the call is
complete. Make sure the system supports this mode before enabling.