GAI-Tronics MRTI 2000 (No. PL1877A) Microprocessor Radio Telephone Interconnect Installation & Service Manual - Manual (Page 51)

PL1877A Microprocessor Radio Telephone Interconnect PC Programming
45 12/10
Paging – Attendant Paging
Paging Enabled from Attendant
Enables or disables the ability of an attendant to use the paging feature of the interconnect. The
“attendant” is a parallel connected telephone instrument.
Attendant Group Calls Enabled
Enables the ability of attendant users to cause generation of 2-Tone group calls.
Number of Digits Accepted from Attendant
Determines the number of digits accepted from attendant for paging. The range is from 0 to the
maximum allowed by the Paging Format.
Paging – Mobile Paging
Mobile Revertive Paging Enabled
Determines whether a mobile can use the paging feature to signal another mobile.
Mobile Group Calls Enabled
Enables the ability of mobile users to cause generation of 2-Tone group calls.
Number of Digits Accepted from Mobile
Determines die number of digits accepted from mobile user for revertive paging. The range is from 0 to
the maximum allowed by the Paging Format.
Paging – General Paging
CTCSS Strip Output for Paging Tones
When enabled, causes CTCSS Stripping during transmission of paging tones. Other radio channel users
(i.e., with microphones on-hook) are not annoyed by the paging call tones or data.
6 dB/octave De-Emphasis of Paging Tones
Enables/disables the 6 dB/octave de-emphasis (or reverse pre-emphasis) of paging tones. (Applies to
transmit only.) Enabling increases the amplitude of the low-frequency tones when audio is injected into
the (EIA) microphone input of the station. Higher modulation of the transmitter during signaling occurs,
counteracting the effect of pre-emphasis. Pre-emphasis, which primarily benefits only voice audio, takes
place in the IDC circuit.
Paging Format
Selects a Paging Format type.
Action to Take on Input Error from Telephone Line
Selects the type of action to take when the time allotted for receiving the first paging digit expires or
improper telephone line dialing is received.
Mobile Answer Timer after Paging Tones
Determines the time allowed for a mobile to answer a page. This time is measured from immediately
after the page is transmitted.