Access/release settings, Access command, Normal release command – GAI-Tronics MRTI 2000 (No. PL1877A) Microprocessor Radio Telephone Interconnect Installation & Service Manual User Manual
Page 38: Mobile access to busy phone line, Require multi-digit prefix
PC Programming
PL1877A Microprocessor Radio Telephone Interconnect
12/10 32
Access/Release Settings
Access/Release – Mobile Initiated – Mobile Access Release
Access Command
Allows selection of a Mobile Access Command. The choices are * or #*. The #* command may be
better in systems sharing a radio channel with other users who may have an interconnect on their radio
system. It may also help prevent accessing via “pseudo DTMF” character (*) generated by certain voice
characteristics.
Normal Release Command
Allows selection of the Normal Release Command as # or ##.
Mobile Access to Busy Phone Line
When enabled, allows mobile users to access an off-hook telephone line with a *** command, making
emergency interruptions of calls in progress to or from the attendant phone possible.
Require Multi-Digit Prefix
Restricts patch access to multi-digit prefix users. It can only be edited if there is at least one Multi-Digit
Prefix or Wildcard code.
Require Multi-Digit Release after Multi-Digit Access
Ties together multi-digit access prefixes and release codes. If tied together, the user entering the multi-
digit access prefix must enter a corresponding multi-digit release code to disconnect.