GAI-Tronics MRTI 2000 (No. PL1877A) Microprocessor Radio Telephone Interconnect Installation & Service Manual - Manual (Page 55)

PL1877A Microprocessor Radio Telephone Interconnect PC Programming
49 12/10
Paging – Paging Format – Multi-Mode Paging Table
The top portion of the screen allows modification of the Multi-Mode Paging table, with up to 100 entries.
Select the entry to modify from among Paging Table Entries. Pressing the Edit button selects that entry
and its settings appear in the lower portion of the screen.
Paging Format
Allows selection of the type of paging for the corresponding user ID.
Codeplan/Preamble
Allows the user to select a codeplan for 2-Tone paging or a preamble tone for 5-Tone paging.
Capcode
Allows the user to enter the capcode for the selected signaling type. The number of capcode digits
depends on the selected signaling type. All the capcode digits must be entered. For 2-Tone, three digits
are allowed with valid range of 0–9.
• For DTMF, 15 digits are allowed with valid ranges 0–9, A–F, #, *.
• For 2805 and 1500, 15 digits are allowed with valid ranges 0–9.
• For Plectron, four digits are allowed. The first two digits cannot be larger than 35. The others have a
valid range 0–9.
• For 5-Tone, five digits are allowed if Group Calls is disabled - six digits if Group Calls is enabled
(with the sixth digit as either 0 or 1. The valid range for each digit is 0–9.
N OTE : Editable only if Paging Format is not set to either CTCSS or CDCSS.
ID
Select a CTCSS or CDCSS tone/code.
Invert Capcode
Allows the user to specify if the CDCSS capcode will be inverted.
N OTE : Editable only if Paging Format is set to CDCSS.
Group Calls/Dual Addressing
If either 2-Tone Group calls or 5-Tone Dual Addressing is enabled, it can nevertheless be allowed for
this user ID by marking this field.
Direct Access
If land-line/attendant direct access is disabled, it can nevertheless be enabled after paging this user ID by
marking this field.
CTCSS Stripping on Paging
If CTCSS is to be stripped during paging only for certain user IDs, enable CTCSS stripping here for
those IDs. Also, disable CTCSS Stripping during Paging under the General Paging menu.
CTCSS Stripping on Direct Access
If CTCSS is to be stripped during direct access only after paging certain users, enable CTCSS stripping
here for those IDs. Also, disable CTCSS Stripping during Direct Access under the Direct Access
Parameters menu.