GAI-Tronics MRTI 2000 (No. PL1877A) Microprocessor Radio Telephone Interconnect Installation & Service Manual - Manual (Page 49)

PL1877A Microprocessor Radio Telephone Interconnect PC Programming
43 12/10
Station Identifier
N OTE : The terms SID (Station Identifier) and CWID (Continuous Wave Identifier) are used here
interchangeably.
SID on Patch Release
Enables/disables automatic transmission of Station ID (using Morse Code) on patch release. The station
call identifier (letters and numbers) must also be programmed into its designated parameters.
SID Only After Station PTT
If enabled, the SID will be generated only if a station PTT has occurred since the last SID. If disabled,
the SID will be generated regardless of whether station PTT occurred.
SID Transmission Time Cycles
Edits the time between automatic Station ID transmissions. Valid range is 0–59 minutes. If set to 0,
automatic, periodic CWID is disabled.
Station Identification
Contains the one to 12-digit Station ID. This ID is transmitted (in Morse Code) automatically at the pre-
set time if the CWID is enabled. Valid values are:
0 to 9 A to Z a to z - , . / _ (to represent a space)