Gasboy Fuel Point PLUS Vehicle - Manual (Page 109)

Fuel Point PLUS Vehicle Installation and Configuration Manual 109
Step Display Description/Action
In this case, proceed to step 33
Change default to Y to enable the option
32 Over RPM Threshold. Default: 4500 RPM. Save
or edit the parameter and save
33 Fuel level collection option. Default: N
Press ENTER to leave the option disabled
Change default to Y to enable the option
34 Switch Timeout units: 1 for Minutes, 2 for
Hours, 3 for Days. Default: Minutes. Save or edit
the parameter and save
35 Switch Timeout. Default: 30 Minutes. Save or
edit the parameter and save
36 Engine On report option. Default: N
Press ENTER to leave the option disabled
Change default to Y to enable the option
37 Press SEND
38 Wait a few seconds until the DP and VIU
programming process finishes
39 An operation successful screen is displayed.