Gasboy Fuel Point PLUS Vehicle - Manual (Page 73)

Fuel Point PLUS Vehicle Installation and Configuration Manual 73
Figure 4-11. Approving WP Registration
7. Close the WP Tunnel.
The organization name is recorded in the WP memory and the device is now ready for
programming the vehicle units.
The Block button blocks the WP device (selected from the grid) for future use, while the Unblock
button activates previously blocked WP units.
4-3.4.
Updating Vehicle List
The Vehicle List contains updated specific calibration data per vehicle model, required for
programming of DP/µDP units. To download the latest vehicle table from Gasboy's FTP server into
the WP, proceed as follows:
1. Connect the WP to the PC using a RS232 serial cable
2. Launch the WP Tunnel application by clicking on the icon
3. Click Import on the menu bar and then select Vehicle List. The application downloads the
updated vehicle table from the FTP server and displays the session details (see Figure 4-12).
This process takes approximately 2 minutes to complete.