Gasboy Fuel Point PLUS Vehicle - Manual (Page 81)

Fuel Point PLUS Vehicle Installation and Configuration Manual 81
Step Display Description/Action
proper receiving signal and avoid the
possibility of finding by mistake another DP.
Wait up to seven seconds for result
Enter 2 for manual insertion of the MAC
address
7 Verify the automatically entered MAC/Type the
eight characters as shown on DP rear label and
save.
Continue to Step 9
8 Wait a few seconds until the WP recognizes the
Fuel Ring & DP
9
The first row displayed the current unit firmware
version, while the second row shows the version
stored in WP’s memory.
Press Y to update.
10
Wait a few seconds while the unit is being
updated
11
A success message is displayed