Gasboy Fuel Point PLUS Vehicle - Manual (Page 67)

Fuel Point PLUS Vehicle Installation and Configuration Manual 67
4-3.
WIRELESS PROGRAMMER REGISTRATION AND CONFIGURATION
Prior to programming the vehicle units, WP device should be registered in the FHO to which the
vehicles to be programmed are attributed.
4-3.1.
FHO Installation
For details on FHO installation, please refer to FHO Installation and User Manual, P/N MDE-4821.
After FHO has been completely set up, verify that the Company name (in Administration → Setup
→ General) field is filled (see Figure 4-3)
Figure 4-3. Administration Setup Screen – General Tab
4-3.2.
WP Tunnel Installation
The WP Tunnel application is required for WP registration. Proceed as follows:
1. Double click on the WP Tunnel.exe file. The following welcome screen appears (see
Figure 4-4)