Gasboy Fuel Point PLUS Vehicle - Manual (Page 88)

Fuel Point PLUS Vehicle Installation and Configuration Manual 88
Step Display Description/Action
more than one FP unit is correlated to the DP
(multi-tank trucks) and proceed to Step 58
13
Select the vehicle manufacturer
14
Select the vehicle model
15
Select the vehicle year
16
Select additional vehicle data, if any
17 The detected DP type is displayed
18 Select the communication protocol
19 Select the DP connection type (whether DP is
connected to ignition switch or not) to set the unit
sleep mode.
If working with Odometer pulses, proceed to
Step 20 in
Table 4-11
20 Odometer reading option. Default: Y
Press ENTER to collect odometer reading
Change default to N to disable the option.
In this case, proceed to Step 22