Gasboy Fuel Point PLUS Vehicle - Manual (Page 97)

Fuel Point PLUS Vehicle Installation and Configuration Manual 97
Step Display Description/Action
The number of remaining functional FP devices
is displayed. Select the Read another FP option
36 Place the WP coil near the FP coil and press
SEND. The WP reads the functional FP data.
If there are more FPs installed, the WP
automatically returns to Step 35 to read
the rest of the units
Otherwise, proceed to Step 37
37 Place the WP coil near the newly replaced FP
coil and press SEND
38 Wait a few seconds until the DP and VIU
programming process finishes.
39 An operation successful screen is displayed.