Gasboy Fuel Point PLUS Vehicle - Manual (Page 28)

Fuel Point PLUS Vehicle Installation and Configuration Manual 28
Figure 2-12. Securing the ID Chip
2-5.4.1. Installing the ID Chip inside the Trunk
As aforementioned, to prevent theft and tampering it is highly recommended to install the ID
chip in a concealed place in the luggage compartment. This procedure is also suggested for
vehicles having plastic fuel inlets.
Proceed as follows:
1. Drill a 0.094" (2.5mm) hole inside the trunk near the fuel inlet using a drilling machine
approved for hazardous environment (see Figure 2-13)
Figure 2-13. Drilling the Trunk
2. Clean thoroughly the surface on which the ID chip is to be placed using a clean cloth
and cleaning solution