OpenEye EasyNVR - Manual (Page 12)

12
This manual is a setup and maintenance guide that can be used for reference when setting up the
EasyNVR and for troubleshooting when a problem occurs. Only authorized personnel should attempt to
repair this unit.
OpenEye reserves the right to make changes to the products represented by this manual without notice.
The following text and symbols mark special messages throughout this guide:
Note Text set off in this manner indicates topics of interests that can help the user understand the
product better.
Tip Text set off in this manner indicates topics and points of interests that can be helpful when
using or setting up the recorder.
Warning: Only authorized technicians trained by OpenEye should attempt to repair this recorder. All
troubleshooting and repair procedures that may be shown are for reference and minor repair only.
Because of the complexity of the individual components and subassemblies, no one should attempt to
make repairs at the component level or to make modifications to any printed wiring board. Improper
repairs can create a safety hazard. And any indications of component replacement or printed wiring
board modifications may void any warranty.
WARNING: To reduce the risk of electrical shock or damage to the equipment:

Do not disable the power grounding plug. The grounding plug is an important safety feature.

Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times.

Disconnect the power from the computer by unplugging the power cord either from the electrical
outlet or the computer.
CAUTION: To properly ventilate your system, you must provide at least 3 inches (7.8 cm) of
clearance at the front and back of the recorder.