OpenEye EasyNVR - Manual (Page 32)

32
There are multiple ways to select and export video footage while searching.
Backup a Selection of Video during Playback
1. Connect a USB thumb drive or external hard drive to the front or rear panel of the recorder.
2. Search your video using Calendar Search or Event Search .
3. During playback, at the point you want the backup segment to begin, click EXPORT on the hover
menu and select
Start .
4. As playback continues, at the point you want the backup segment to end, click EXPORT on the
hover menu and select
End .
5. The Quick Backup Confirmation screen will appear; this screen will display the required space to
complete the backup as well as the date and time range of the backup. Click
Yes .
6. When completion message appears, click Close and remove the USB drive.
Backup Video from Event Search
1. Connect a USB thumb drive or external hard drive to the front or rear panel of the recorder.
2. Start an Event Search (reference the previous section Event Search ).
3. Once you have selected an event, select Export .
4. The Video Export Confirmation screen will appear; this screen will display the required space to
complete the backup as well as the date and time range of the backup. Click
Yes.
5. When completion message appears, click Close and remove the USB drive.
Backup Video from Calendar Search
1. Connect a USB thumb drive or external hard drive to the front or rear panel of the recorder.
2. Start a Calendar Search (reference the previous section Calendar Search ).
3. Once you have selected a time and date, select Instant Export . This will automatically choose a
backup time 1 minute from the selected time.
4. The Video Export Confirmation screen will appear; this screen will display the required space to
complete the backup as well as the date and time range of the backup. Click
Yes.
5. When completion message appears, click Close and remove the USB drive.