OpenEye EasyNVR - Manual (Page 60)

60
This option allows you to limit the amount of power sent to your camera over the Ethernet connection.
The default setting is 30W.
CAUTION: Do not change this setting unless instructed to do so by OpenEye technical support.
1. On the Hover menu, click Setup .
2. In the Management menu, click Maintenance.
3. Slide the red indicator across the PoE Power Limitation bar or click the keyboard icon to open
the on-screen keyboard and enter a value. The black value in the middle of the bar indicates the
current limitation.
4. Click Close to continue.