Connection guide, Power setup, Monitor setup – OpenEye EasyNVR User Manual
Page 22
22
Power Setup
WARNING:
To reduce the risk of electrical shock or damage to the equipment:
Do not disable the power grounding plug.
The grounding plug is an important safety feature.
If the electrical plug you are using does not have a ground plug receptacle
contact a licensed electrician to have it replaced with a grounded electrical
outlet.
Plug the power cord into a grounded (earthed) electrical outlet that is easily
accessible at all times.
Disconnect the power from the recorder by unplugging the power cord either
from the electrical outlet or the recorder.
Monitor Setup
The recorder has the following connections available to attach a monitor.
HD OUT Output
To TV / Digital Display
VGA
Connect to an analog VGA Monitor
Attach the monitor to the rear of the recorder using the cable supplied by the monitor manufacturer.
Refer to the monitor manual for detailed information on how to setup and use it.
Note
The monitor must be capable of having a minimum screen resolution of 1024 x 768 and
display colors of at least 32 Bit.