Teac SS-CDR1 - Manual (Page 16)

2 − Controls and connectors
16
TASCAM SS-CDR1
The content shown here will depend on whether the unit is
in playback/stop, or recording/record-ready modes.
While playing or stopped
1 REPEAT
This will be lit in Repeat Mode.
2 A-B
This will be lit in A-B Repeat mode.
3 PITCH
This will be lit if the Pitch Control function is active.
4 KEY
This will be lit if the Key Control function is active.
5 A_CUE
This will be lit if the Auto Cue function is active.
6 A_READY
This will be lit if the Auto Ready function is active.
7 INC_PLAY
This will be lit if the Incremental Play function is
active.
8 FLASH
This will be lit if Flash Load has been completed.
While recording or record-ready
9 FILE
This indicates the recording file format (WAV, MP3, or
CD-DA).
0 FS
This indicates the sampling rate of the recording file.
q BIT
This indicates the bit rate of the file being recorded
(only for an MP3 file).
w A_TRACK
This will be lit if the Auto Track function is on.
e SYNC
This will be lit if Sync Recording is on.
r SRC
This will light if the Sampling Rate Converter function
is on.
t COMP
This will be lit if the compressor is on.
y VOLUME
This indicates the recording volume.
Various indicators