Teac SS-CDR1 - Manual (Page 26)

5 − Playback
26
TASCAM SS-CDR1
Specifying a track number
You can use the remote’s numeric keys ( 0 ˗ 9 ) to directly
specify the number of the track that you want to play.
For audio CD format, the track number will be a maximum
of two digits. For WAV format or MP3 format, the track
number will be a maximum of three digits.
1. Use the remote’s numeric keys (
0
˗
9
) to enter the
track number. Enter the track number starting
with the highest digit.
To specify track 1 •
Press the 1 key once.
To specify track 12 •
Press the 1 key ∑ 2 key.
To specify track 103 •
Press the 1 key ∑ 0 key ∑ 3 key.
2 Press the
PLAY
key.
The selected track will begin playing.
Alternatively, you can use this procedure but press the
remote’s READY key instead of the PLAY key to pause
at the beginning of the selected track.
NOTE
As an alternative to press the • PLAY key, you can
press the MULTI JOG dial to playback the file select-
ed (or the remote’s ENTER key).
You cannot use the numeric keys to specify the
•
track while in program or random mode.
Fast-forward/rewind search
You can rapidly search forward or backward while listen-
ing to the audio of a track.
1 Play or pause the desired track.
2 Hold down the
˚ or ∆ key.
Fast-forward or rewind search will begin.
3 To stop searching, release the key you were hold-
ing.
You will return to the state (either playing or paused) in
which you were prior to searching.
Time search
While the unit is stopped, playing, or paused, you can
locate to a specified time in the specified track.
NOTE
You cannot use time search when the play mode is
program mode or random mode.
1. Use the remote’s numeric keys ( 0 - 9 ) to enter the
number as follows.
For WAV or MP3 format:
Track number: three digits •
Elapsed time from the beginning of the track •
(
XX
hours /
XX
minutes /
XX
seconds): two digits each
For audio CD format
Track number: two digits •
Elapsed time from the beginning of the track ( •
XX
minutes /
XX
seconds): two digits each
For example if you want to specify a location that is 1 min-
ute 30 seconds from the beginning of MP3 format track 2,
you would press keys in the following order.
0 ∑ 0 ∑ 2 ∑ 0 ∑ 0 ∑ 0 ∑ 1 ∑ 3 ∑ 0
When you finish entering the nine digits, the SS-CDR1
will automatically locate to the specified position.
Similarly, if you want to specify a location that is 1 minute
30 seconds from the beginning of audio CD format track 2,
you would press keys in the following order.
0 ∑ 2 ∑ 0 ∑ 1 ∑ 3 ∑ 0
When you finish entering the six digits, the SS-CDR1 will
automatically locate to the specified position.
If the unit is stopped or playing back prior to the locate
operation, playback will begin after the locate operation. If
the unit is paused prior to the locate operation, it will pause
after the locate operation.
NOTE
If you specify a track number that does not exist in
the current play area, or a time that does not exist in
the track, the operation will be cancelled at that
point.