Teac SS-CDR1 - Manual (Page 27)

5 − Playback
TASCAM SS-CDR1
27
Time skip
While playing or paused, you can skip backward or for-
ward in one-minute steps.
1 While playing or paused, press the ∆ or ˚
keys.
You will locate to a position one minute before or after
the current location. Following the locate, the playback
or pause condition will continue as it had been prior to
the operation.
NOTE
If you press the • ∆ key at a point less than one
minute after the beginning of the track, you will
locate to the beginning of the current track.
If you press the
• ∆ key at a point less than one
second after the beginning of the track, you will
locate to a point one minute before the end of the
preceding track. However if the track is the first
track in the card or the program, you will pause at
the beginning of the current track. (Even when
using random play, pressing the
∆ key at a point
less than one second from the beginning of the
track will locate to the beginning of the track).
If you press the
• ˚ key at a point that is less than
one minute from the end of the track, you will
locate to the beginning of the next track. However
if the track is the last track in the card or the
program, you will pause at the end of the current
track.
Playback modes
The tracks in the play area can be played using one of the
following four types (modes) of playback.
Continuous playback (default setting)
The tracks in the play area will play back in order of their
track numbers.
Single playback
Only the currently selected track will play back, and then
playback will stop.
Program playback
The tracks will be played back in the order you pro-
grammed (see “Program playback” on page 28).
Random playback
All tracks in the play area will play back in a random order
without regard to their track number. When all tracks have
been played back, playback will stop.
Specifying the playback mode
You can easily select the playback mode by using a dedi-
cated key on the remote. To select the playback mode from
the SS-CDR1 itself, use menu mode.
Using the dedicated key of the remote
1 If the SS-CDR1 is stopped or if no media is in-
serted, pressing the remote’s
P.MODE
key will
alternate between the play modes. The home
screen shows the currently selected mode as
follows.
Display Playback mode
CONTINUE Continuous playback
SINGLE Single playback
PROGRAM Program playback
RANDOM Random playback
Time searching from an incomplete entry
If you press the remote’s ENTER key (or the PLAY or
READY key) before you finish entering the last second’s
place of numeric input, you will locate to the position that
was specified at that point.
For example if you are using a CD that contains MP3 for-
mat tracks, and you enter “ 0 ∑ 0 ∑ 2 ∑ 0 ∑ 0 ∑ 1 ∑
2 ” and press the ENTER key, you will locate to a position
12 minutes after the beginning of track 2.
After the locate operation, the unit will either play or
pause, depending on the status prior to pressing the ENTER
key. If you press the PLAY key, playback will begin. If you
press the READY key, the recorder will pause.
NOTE
This method allows you to omit the leading 0 of the •
last place you enter (track, hour, minute, second),
even the leading 00 of the track number. For exam-
ple if you are using a CD that contains MP3 format
tracks, and you want to locate to a position that is
two minutes after the beginning of track 2, you
would enter “0
∑ 0 ∑ 2 ∑ 0 ∑ 0 ∑ 2” and press
the ENTER key.
If you enter only the track number and press the
•
ENTER key (or the PLAY key or READY key), the
result is the same as “Specifying a track number”
on page 26.