Teac SS-CDR1 - Manual (Page 35)

5 − Playback
TASCAM SS-CDR1
35
Playing back in monaural
You can play back a stereo audio file in monaural. In this
case, the L/R channels of the track will be mixed and out-
put from the L / R output channels.
Use the menu to make this setting (for details on menu
operations, refer to “Operations in the menu screens” on
page 18).
1 Press the MENU key to access the main menu list
screen.
2 Select the PLAY menu.
3 Highlight the PREFERENCE item.
4 Press the front panel
˚ key (or the remote’s
cursor ¥ key) to proceed to the PLAY PREFER-
ENCE screen.
5 Select MONO MIX .
6 Turn the
MULTI JOG
dial (or use the remote’s
cursor § , ¶ keys) to turn the setting
ON
/
OFF
.
7 When you’ve finished making settings, press the
front panel TIME (ESC) key (or the remote’s CLR/
ESC
key) to return to the home screen.
NOTE
This setting is remembered even when the power is
turned off.
Resume Playback
If the Resume Playback mode is on, playback will begin
from the location at which playback was last stopped (the
“resume point”).
The Resume point will be erased when you perform the
following operations.
Remove the media. •
Switch the current device •
Switch the play area. •
Switch the play mode. •
Modify the contents of the media (by recording, edit- •
ing, or erasing).
Use the menu to turn the Resume function on/off (for
details on menu operations, refer to “Operations in the
menu screens” on page 18).
1 Press the
MENU
key to access the main menu list
screen.
2 Select the PLAY menu.
3 Highlight the PREFERENCE item.
4 Press the front panel
˚
key (or the remote’s
cursor ¥ key) to proceed to the PLAY PREFER-
ENCE screen.
5 Select RESUME.
6 Turn the
MULTI JOG
dial (or use the remote’s
cursor
§ , ¶
keys) to turn the setting
ON
/
OFF
.
7 When you’ve finished making settings, press the
front panel
TIME (ESC)
key (or the remote’s
CLR/
ESC
key) to return to the home screen.
NOTE
This setting is remembered even when the power is •
turned off.
If no playable track exists (e.g., if not even one
•
track has been registered in program mode), of
cause, the resume point cannot be made. The coun-
ter display will state
000tr 00h 00m 00s
.
If the resume point does not exist (i.e., if the time •
registered as the resume point does not exist), the
beginning of the first track in the play area will be
the resume point.