Teac SS-CDR1 - Manual (Page 62)

62
TASCAM SS-CDR1
Overview
The SS-CDR1’s playlist playback functions are available if
you are using a CF card. Playlist playback is not possible
for a CD.
When you first insert a CompactFlash card into the
SS-CDR1, three empty playlists (01–03) will automatically
be created on the card. You can register audio files from
the card into these playlists, and then select the desired
playlist (the current playlist) so that its files will be played
when you specify Playlist as the play area.
To perform playlist-related operations, start by opening the
“playlist finder screen”.
From this screen, proceed to the “playlist menu screen”
where you can add files to a playlist or delete the entire
contents of a playlist.
From the playlist finder screen, you can also proceed to the
“playlist screen” (which shows the files in the playlist).
Select a file for operations, and then move to the “playlist
menu screen” where you can add a file to the playlist, delete
a file from the playlist, or move a file within the playlist.
9 − Editing a playlist (CF only)
If the play area (“Play area” on page 24) is PLAYLIST,
make sure that the SS-CDR1 is stopped, playing, or
paused, and hold down the front panel MENU key (or the
remote’s FINDER key) to access the playlist finder screen.
Opening the playlist finder screen
Navigating in the playlist finder screen
The playlist finder screen will show three playlists
(
PLAYLIST_01–PLAYLIST_03
).
The number of files (tracks) registered in each playlist is
shown at the right.
With the playlist finder screen displayed, turn the front panel
MULTI JOG dial (or use the remote’s cursor § , ¶ keys) to
select (highlight) the playlist that you want to operate.
In this state you can perform the following operations:
To start playback from the beginning of the playlist •
Press the PLAY key. Playback will begin, and you
will return to the home screen.
The playlist you selected will be specified as the cur-
rent playlist.
To pause at the beginning of the playlist
•
Press the READY key. The SS-CDR1 will pause, and
return to the home screen.
The playlist you selected will be specified as the cur-
rent playlist.
To open the playlist screen •
Press the front panel MULTI JOG dial or ˚ key (or
the remote’s ENTER key or cursor ¥ key. The display
goes as follow.
Opening the playlist menu screen •
Press the MENU key.
For details on each item in the playlist menu, refer to
“Operations in the playlist menu screen” on page 54.