Teac SS-CDR1 - Manual (Page 18)

3 − Menu screens
18
TASCAM SS-CDR1
Operations in the menu screens
You can perform operations in the menu screens as fol-
lows.
To select an item (vertically in the screen): •
Turn the
MULTI JOG
dial of the SS-CDR1.
Use the cursor § , ¶ keys of the remote.
To confirm the highlighted item: •
Press the MULTI JOG dial of the SS-CDR1.
Press the
ENTER
key of the remote.
To move the cursor left/right: •
Use the ∆ , ˚ keys of the SS-CDR1.
Use the cursor ˙ , ¥ keys of the remote.
To select a sub-screen not currently shown in the •
screen (an arrow is shown at the right):
Press the ˚ key of the SS-CDR1.
Press the cursor ¥ key of the remote.
To return to the previous menu level: •
Press the ∆ key of the SS-CDR1. Press the cursor
˙ key of the remote.
To return directly to the home screen from menu •
mode:
Press the TIME (ESC) key of the SS-CDR1.
Press the
CLR/ESC
key of the remote.
NOTE
If there is an item above (or below) the currently •
displayed list, a § or ¶ symbol will be shown at
the top or bottom of the list.
As a specific example, we’ll explain how to turn the
•
PLAY menu item AUTO CUE “on”, and then change
the auto cue level.
1 Press the
MENU
key to access the main menu list
screen.
2 Select the desired menu.
From the SS-CDR1:
Turn the MULTI JOG dial to highlight PLAY, and then
press the MULTI JOG dial.
From the remote:
Use the
cursor § , ¶ keys to highlight PLAY, and
press the ENTER key.
3 Select the AUTO CUE item.
From the SS-CDR1:
Turn the MULTI JOG dial to highlight AUTO CUE, and
then press the MULTI JOG dial (or the ˚ key).
From the remote:
Use the cursor § , ¶ keys to highlight AUTO CUE,
and then press the ENTER key (or the cursor ¥ key).
4 Turn the AUTO CUE item
ON
.
From the SS-CDR1:
Turn the MULTI JOG dial to highlight
ON
.
From the remote:
Use the
cursor § , ¶ keys to highlight
ON
.
5 Proceed to the AUTO CUE sub-screen.
From the SS-CDR1:
Press the ˚ key.
From the remote:
Press the
cursor ¥ key.
6 Set AUTO CUE LEVEL to the desired level.
From the SS-CDR1:
Turn the MULTI JOG dial to select a value.
From the remote:
Use the
cursor § , ¶ keys to select a value.
7 To return to the home screen.
From the SS-CDR1:
Press the TIME (ESC) key.
From the remote:
Press the CLR/ESC key.