Teac DP-32 - Manual (Page 11)

TASCAM DP-32
11
2 - Quick Guide
Playback and mixing
In this section, we will play back the demo song on the
included SD card.
When this unit is purchased new, an SD card with the
demo song on it is already inserted in the unit, but we
will start by explaining how to insert an SD card using the
procedures below.
Preparation
1. Insert the included SD card into the SD card slot
on the rear panel. Be careful not to forcibly insert
the card in the wrong direction. Doing so could
damage the SD card slot or the SD card.
2. Connect the supplied AC adaptor (TASCAM PS-
1225L) to the DC IN 12V jack on the rear panel.
TASCAM
PS-1225L
The bottom panel has a hook (cord holder) that can
be used to hold the AC adaptor cord in place. Wrap
the cord around this hook to prevent it from being
disconnected during use.
CAUTION
Never use any AC adaptor or power cord other than the
supplied TASCAM PS-1225L AC adaptor and its power
cord. Use of a different adaptor or cord could cause
malfunction, fire or electric shock.
3. Connect headphones to the PHONES jack on the
front panel.
ヘッドホン
4. Press and hold the STANDBY/ON button for a few
seconds on the rear panel to turn the power ON.
When the unit starts, the Home screen opens on
the display.
Start-up screen
Home screen
AC outlet
Headphones
DC plug