Teac DP-32 - Manual (Page 9)

TASCAM DP-32
9
1 – Introduction
• Additional information is introduced in the following
styles when needed: TIP, NOTE, and CAUTION.
TIP
Useful hints when using the unit.
NOTE
Explanation of actions in special situations, supplementary
explanations, etc.
CAUTION
Instructions that should be followed to avoid injury,
damage to the unit or other equipment, and loss of
data.
Intellectual property rights
• TASCAM is a trademark of TEAC Corporation, registered
in the U.S. and other countries.
• SDHC Logo is a trademark of SD-3C, LLC.
• Microsoft, Windows, Windows XP, Windows Vista,
and Windows 7 are either registered trademarks or
trademarks of Microsoft Corporation in the United
States and/or other countries.
• Apple, Macintosh, iMac, Mac OS and Mac OS X are
trademarks of Apple Inc.
• Pentium and Intel are trademarks of Intel Corporation
in the U.S. and/or other countries.
• Other company names, product names and logos
in this document are the trademarks or registered
trademarks of their respective owners.
Any data, including, but not limited to information,
described herein are intended only as illustrations
of such data and/or information and not as the
specifications for such data and/or information. TEAC
Corporation disclaims any warranty that any use
of such data and/or information shall be free from
infringement of any third party's intellectual property
rights or other proprietary rights, and further, assumes
no liability of whatsoever nature in the event of any
such infringement, or arising from or connected with
or related to the use of such data and/or information.
This product is designed to help you record and
reproduce sound works to which you own the
copyright, or where you have obtained permission
from the copyright holder or the rightful licensor.
Please use the product appropriately.
Under no circumstances will TEAC Corporation be
responsible for the consequences of any illegal
copying performed using the recorder.
Precautions for placement and
use
• The operating temperature should be between 5°C and
35°C (41°F and 95°F).
• Do not install in the following types of places. Doing
so could degrade the sound quality and/or cause
malfunctions.
• Places with significant vibrations or that are
otherwise unstable
• Near windows or other places exposed to direct
sunlight
• Near heaters or other extremely hot places
• Extremely cold places
• Places with bad ventilation or high humidity
• Very dusty locations
• Make sure that the unit is mounted in a level position
for correct operation.
• Do not place any object on the unit for heat dissipation.
• Avoid installing this unit on top of any heat-generating
electrical device such as a power amplifier.
Beware of condensation
If the unit is moved from a cold to a warm place, or used
after a sudden temperature change, there is a danger of
condensation; vapor in the air could condense on the
internal mechanism, making correct operation impossible.
To prevent this, or if this occurs, let the unit sit for one or
two hours at the new room temperature before using.
Cleaning the unit
Use a dry soft cloth to wipe the unit clean. Do not clean
the unit with a chemically treated cloth or substances
such as thinner and alcohol. This could damage the
surface or change the color of the unit.
About SD cards
This unit uses SD cards for recording and playback.
SD and SDHC cards that are at least 512 MB in size can be
used.
A list of SD cards that have been tested with this unit can
be found on the TASCAM website (http://tascam.com/).
Use of cards that have not been verified for use with this
unit could result in the unit not functioning properly.