Teac DP-32 - Manual (Page 14)

14
TASCAM DP-32
2 - Quick Guide
Connecting and setting the input
sources
1. Connect an electric guitar to the MIC/LINE INPUTS
H jack on the rear panel.
2. Set the LINE-GUITAR switch on the rear panel to
GUITAR.
The GUITAR indicator lights.
Now the guitar is the input source for INPUT H.
TIP
When connecting an electric-acoustic guitar with a built-in
preamp or an active-type electric guitar, or when using an
effects pedal, for example, between the guitar and this unit,
set the LINE-GUITAR switch to LINE on the rear panel.
Setting the guitar as the recording
source for TRACK 1
When you press the ASSIGN button to open the Assign
screen, the default screen setting for the recording source
is
A
(INPUT A) for TRACK 1,
B
(INPUT B) for TRACK 2,
C
(INPUT C) for TRACK 3, and so on for tracks 4 to 8 (
D
to
H
).
(See "Assigning inputs" on page 40.)
Since initially INPUT H is set only as the recording source
for TRACK 8, you must change the TRACK 1 recording
source.
Follow these procedures to change the recording source
of TRACK 1.
1. Press the ASSIGN button to open the Assign screen.
2. Use the CURSOR (5/b/g/t) buttons or press
the SELECT button for TRACK 1 to move the cursor
(frame) on the Assign screen with
TRACK 1
.
3. Use the JOG/DATA dial or the SOURCE button for
INPUT H to set the recording source of TRACK 1 to
H
.
Adjusting and monitoring the input
level
1. Press the HOME button to return to the Home
screen.
2. Press the REC button for TRACK 1.
The REC button flashes and the unit enters recording
standby.
3. Use the TRIM knob for INPUT H to adjust the guitar
input level. Set the TRIM knob so that the OL
indicator for INPUT H does not light even when the
loudest sound to be recorded is input.
Guitar
GUITAR indicator