Teac DP-32 - Manual (Page 87)

TASCAM DP-32
87
14 - Using CDs
Erasing a CD-RW
Follow these procedures to erase the songs recorded on a
CD-RW disc.
1. When in
Multi Track
mode, press the CD button
to open the
CD
menu.
2. Load the CD-RW that you want to erase.
3. Use the JOG/DATA dial to select
ERASE
and then
press the F4 (t) button.
A confirmation message appears.
4. Press the F2 (
YES
) button to begin erasing the CD-
RW.
After the disc is erased, the
CD menu reopens.
CAUTION
This operation erases the entire CD-RW. Erased data
cannot be restored. Confirm that you will not lose
important data before erasing a disc.
NOTE
CD-R discs cannot be erased.
Media Compatibility Table
Audio CD
playback
and import
Audio CD
writing
Commercially-available
standard CDDA format CD
OK
Finalized standard CDDA
format CD-R/CD-RW (made by
this player)
OK
Finalized standard CDDA
format CD-R/CD-RW (made by a
device other than this player)
–
Unfinalized standard CDDA
format CD-R/CD-RW (made by
this player)
OK OK
Unfinalized standard CDDA
format CD-R/CD-RW (made by a
device other than this player)
N N
Commercially-available CD in
a format other than standard
CDDA (protected CD, DATA CD,
enhanced CD, etc.)
–
Non-standard CDDA format
CD-R/CD-RW (DATA CD,
enhanced CD, etc.)
–
Blank High-Speed CD-R/CD-RW OK
Ultra-Speed CD-RW N N
OK: Compatible
– : Operation not assured
N: Not compatible