Verilink AS4000 (34-00244) Product Manual - Manual (Page 37)

Verilink AS4000 User Manual 3-1
Chapter
3
Hardware Installation
This chapter provides detailed information for AS4000 hardware
installation. This chapter includes procedures, required tools and
supplies, and general information for component configuration.
Refer to the shelf planning worksheet when installing the system
components.
Required Hardware and Tools
To install the Access System 4000 components, the following tools
and hardware are recommended:
• Cross-tip (phillips) screwdriver for securing shelves to the
equipment rack
• Small adjustable crescent wrench (adjustable spanner)
• Small straight–slot screwdriver for setting the address switch
• Anti-static wrist strap
• Digital voltmeter for testing system power
• Network interface and equipment cables
• Fuse panel and fuses
• 12- through 22-gauge wire (for DC power)
Equipment Inspection
WARNING
The AS4000 system components contain electrostatic-sensitive circuits.
Before handling components, wear an anti-static wrist strap connected to
frame ground to prevent damage to circuits from electrostatic discharge.