Verilink AS4000 (34-00244) Product Manual - Manual (Page 39)

Hardware Installation
Verilink AS4000 User Manual 3-3
Figure 3-1 Shelf Mounting
37. Position the shelf at the designated location within the
equipment rack .
38. Secure shelf into place with machine screws.
Installing Power Supplies
This section describes the application of power to the AS4000.
Applying AC
Power
To apply power to the AS4000, do the following:
1. Plug the 115 VAC power supply into the AC outlet.
NOTE: If your site has UPS power, Verilink recommends connecting
one AC power supply to the UPS and the other power supply
directly to local commercial power. If there is a failure of the
UPS, service can continue.
2. Verify that the Power LED is lit on the power supply front
panel. If the LED is not lit, verify the voltage at the AC power
outlet.