Visara 410 - Manual (Page 65)

8-9
Chapter 8: Citrix ICA Client for Windows CE
707027-002
To configure Firewall Settings
If you are using a SOCKS proxy server to limit access to your Citrix
servers, you must configure the Visara ICA Client to connect to Citrix
servers through a SOCKS proxy server. You can configure a default
SOCKS proxy for all connections or use only a SOCKS proxy with a
specific connection file.
To configure a SOCKS proxy server
1. Click Connect via SOCKS proxy.
2. In the Address of proxy to use box, enter the SOCKS proxy server’s
IP address.
3. In the Port box, enter the proxy server’s port number (if different than
1080).
4. Click OK to save your changes.
Configuring Alternate Address Translation
If the Visara is outside a firewall that uses address remapping, you must
configure the Visara ICA Client to use the alternate address returned by
the master ICA Browser. This is necessary even if you are not using a
SOCKS proxy server.
Note: You must also use the ALTADDR utility to manually set the alternate
address for each Citrix server, See the Command Reference appendix of
either the MetaFrame Administrator’s Guide or the W
IN F RAME System
Guide for more information.
Note: If you set alternate address translation for all connection entries, it
cannot be disabled for specific connection entries.