ATL Telecom IP300S - Manual (Page 28)

IP SIP Phone v2 User’s Guide Mar. 2005
[28/100]
S e n t : 1 , 2 3 4 , 5 6 7
R c v d : 1 , 2 3 4 , 5 6 7
7-3 Bytes: Received / Sent bytes, including IP / UDP / RTP header and payload
S e n t : 1 , 2 3 4 , 5 6 7 K B
R c v d : 1 , 2 3 4 , 5 6 7 K B
7-4 Packet lost: Received / Sent RTP packet lost ratio.
S e n t : 1 1 . 2 1 %
R c v d : 9 . 3 %
7-5 Delay: One-way / Round-trip delay
O n e - w a y : 1 , 2 3 4 m S
R o U n d - t r i p : N / A
7.7. Forward and DND
You can configure the target number to forward to while this phone is busy or not answered
within a predefined guarding interval. This forwarding number is also employed while the phone
is engaged in Do Not Disturb (DND) mode or while the user presses 【
】 Forward key on an
incoming waiting call.
The system forwarding rules will check Do Not Disturb mode first, then All Calls Forward,
Busy Forward, finally going to No Answer Forward while no-answer timer expires.
7.7.1. Do Not Disturb (DND)
You can block incoming calls by configuring the Do Not Disturb feature. Blocked calls are
logged in the Missed Calls.
Press 【 】 DND to toggle Do Not Disturb feature.
7.7.2. Call Forward
To configure the target number to forward to while this phone is busy or not answered within
a predefined guarding interval:
z By keypad or TELNET:
„ Press 【 】 FUNC 【 】 + # to activate menu.
„ Go to submenu “4. Call forward” / “1. Target number”.
„ Press 【
】 HOLD to pick an entry from address book. . Use 【Õ】and 【 Ö】to
view the current number.
M I c h a e l < s i P : 8 8 8 8
@ Q u a n t i e r T e c h . c o
„ 【 】 Press MUTE to remove the current mapping of forward number.